An array of composite friction pads bonded to a plated steel backing plate, manufactured in-house

Safer, easier turbine maintenance with digital wear-indicating brake pads

Amentum's team at Rhyd-y-Groes Wind Farm was dealing with a brake part that caused wear and vibration problems. FTL developed a brake pad with digital wear indicators for them, and it is now in use across all of their turbines.

Amentum's team says the new brake pad makes the turbine safer and makes maintenance easier: it is working great.

A named example of FTL developing a replacement brake pad for wind turbines.

From a brake part causing problems to a wear-indicating pad

The existing brake part on Amentum's turbines was causing performance issues. Wear and vibration were the main problems, and Amentum needed a better solution.

FTL created a brake pad with digital wear indicators for Amentum, replacing the part that had been causing the wear and vibration issues.

The project

Customer: Amentum, at Rhyd-y-Groes Wind Farm

Challenge: a brake part causing wear and vibration problems

Solution: a brake pad with digital wear indicators, replacing that part

Result: in use across all of Amentum's turbines at Rhyd-y-Groes

What Amentum says the new pad has delivered

The new brake pad has been implemented across all of Amentum's turbines at Rhyd-y-Groes, and the team reports that it is working well.

Safer turbines

The upgraded brake pad makes the turbine safer.

Easier maintenance

The technicians find maintenance simpler.

In use across all turbines

The new pad is now in use across all of Amentum's turbines at Rhyd-y-Groes Wind Farm.

What Amentum said about FTL

“They've been very helpful in creating this product for us, and we've implemented it in all our turbines now. It's working great. It makes the turbine safer and it makes maintenance easier, so that's worked really, really well.”

Matt Peters, Turbine Technician, Amentum, Rhyd-y-Groes Wind Farm Amentum

Attribution

Customer

Amentum, Rhyd-y-Groes Wind Farm

Sector

Wind energy

Amentum logo

Frequently asked questions about the Amentum brake pad

Who is Amentum?
Amentum's team runs turbines at Rhyd-y-Groes Wind Farm and is an FTL customer. Matt Peters, Turbine Technician, gave the testimonial on this page.
What problem did FTL solve for Amentum?
The existing brake part on Amentum's turbines was causing performance issues, mainly wear and vibration. FTL created a brake pad with digital wear indicators to replace it.
Where is the new brake pad in use?
It has been implemented across all of Amentum's turbines at Rhyd-y-Groes Wind Farm, and the team reports that it is working well.
What does Amentum say the new pad has changed?
The customer account names:
  • Safer turbines
  • Easier maintenance for the technicians
Can FTL support repeat supply over the long term?
Yes, where the requirement fits FTL's capabilities. FTL can connect material work with component engineering, machining, bonding, finishing, testing, inspection and repeat supply. The exact project scope must be agreed.
Does FTL support customers outside the UK?
Yes. FTL manufactures in North Wales and supplies components worldwide. 84% of output is exported.

Need a brake component that performs better in service?

Tell FTL what the component needs to do, the standards it must meet and the technical information your team currently has.

A short initial brief is enough.

Optional drawing or specification upload available. Do not upload classified, export-controlled or contract-restricted technical information through the public form.