Industrial brake linings and brake bands: woven, moulded, roll and non-asbestos
FTL is a UK brake lining manufacturer in Caernarfon, North Wales, making friction material for industrial drum brakes and band brakes. We make woven, moulded and flexible roll lining for cranes, hoists, winches, lifts and heavy machinery, and every grade is non-asbestos.
Start with the brake, the lining details, a drawing or the duty, not simply a part number.
We make the lining as roll or sheet, cut to shape, or bonded to its backing component in our own works.
For the wider range of materials and forms, explore our friction products.
When engineering teams need an industrial brake lining
The correct route depends on what has prompted the requirement.
A new machine or brake needs a lining
The braking or holding function is understood, but the friction material, lining construction or repeatable production route has not yet been established. FTL can support the programme from application review and material selection through prototypes, testing, validation support and controlled repeat manufacture.
New Programme Support →An existing lining is not performing as required
Inconsistent braking, excessive or unpredictable wear, heat concerns, or variation between linings or production batches. FTL can review the available evidence across the friction material, the lined component, the operating environment and the production route.
Performance Optimisation →An old lining, material or supplier is no longer available
The machine must stay in service, but the original lining, material, drawing or supplier has become obsolete, including an old asbestos lining that needs a non-asbestos grade in its place. FTL can review the existing part and what is known about the brake before proposing a redevelopment, prototype and revalidation route.
Legacy & Obsolete Reverse Engineering →The lined component passes through too many suppliers
The friction material, backing component, machining, bonding, finishing and inspection are divided between separate organisations. FTL can connect the relevant stages through one accountable manufacturing route.
Single-Source Friction Manufacturing →A prototype must progress into controlled repeat supply
The engineering solution needs to move into a defined production arrangement supported by repeat manufacturing controls, inspection, traceability, inventory holding, scheduled call-off, customer-specific packaging and identification, and delivery.
New Programme Support
For a new industrial brake requirement that needs a defined friction-material, lining-construction and manufacturing route. Support can include application review, material selection or formulation, lining and component engineering, prototype manufacture, testing and inspection, validation support and transfer into controlled repeat production.
Legacy & Obsolete Component Reverse Engineering
For a lining still required after its original material, drawing, supplier or finished component becomes unavailable. Support can include existing-part and evidence review, dimensional assessment, geometry redevelopment, alternative material selection or development, prototype manufacture, testing and revalidation support and repeat manufacture.
Friction System Performance Optimisation
For an existing lining or brake with inconsistent braking, excessive or unpredictable wear, heat concerns or production-repeatability problems. Support can include symptom and evidence review, operating-condition assessment, investigation of material and component factors, alternative formulation or component work, comparative prototypes, testing and inspection and implementation support.
Move from a brake lining requirement to a controlled engineering and supply route
A custom industrial brake lining project should define more than the lining's visible shape.
The engineering route must establish the required function, friction material, lined-component construction, manufacturing stages, inspection evidence and responsibilities that apply before repeat supply begins.
Potential engineering outcomes
- A shared definition of the application and required braking or holding function
- A friction-material selection or development route
- A defined lining geometry and backing-component route
- A prototype and test plan
- Agreed inspection and acceptance requirements
- Clear FTL and customer validation responsibilities
- A documented decision on whether further development is required
Potential manufacturing and supply outcomes
- One accountable route from friction material to finished lining
- Controlled machining, bonding, finishing and inspection
- Defined production records and traceability
- Progression from prototype into repeat manufacture
- Inventory and scheduled call-off where agreed
- Customer-specific packaging and labelling
- Scheduled delivery
Performance, service life, lead time and approval outcomes depend on the application, available information, agreed testing and respective customer and FTL responsibilities.
Supplied as roll, sheet, cut linings or a bonded component
FTL makes the material, and the finished component cut from it. Not every project requires every stage.
There are three supply forms. Moulded rigid material comes as flat sheet for cutting and machining to the component geometry. Woven and flexible organic material comes on the roll, for brake bands, cut and shaped linings and cone linings. Discs, linings, pucks, hexagons and other moulded shapes are made on request.
FTL cuts, bonds and machines the lining in-house where the component needs it. For a lined component, FTL bonds friction material to backing plates and associated components as part of a controlled, complete-component manufacturing route. Thicker sheet, other sizes, special shapes and materials not listed here are on application.
Prototypes, low-volume batches and repeat supply
FTL supports prototypes and repeat manufacture of industrial brake linings.
A lining project can start with a prototype, move to a low-volume batch and then into a production batch. For a worn part with no drawing, the reverse engineering route starts from the existing part.
What FTL needs to know to quote a brake lining
A material name, nominal coefficient or existing part number does not define the complete requirement.
Begin with the brake and what the lining must do. Send what you have: the drawing, an OEM part number or the old lining's reference, the drum or band size, whether it is a drum, band or disc brake, the load and speed, whether it runs dry or near oil or water, the quantity, and the grade if you already have one in mind. FTL confirms technical fit after reviewing the specific application.
What is the brake?
- Drum, band or disc brake
- What the brake is required to stop or hold
- Whether the machine is new or already in service
- What has prompted the enquiry
- Whether the requirement is for lining material, a cut lining or a bonded component
Is this a new lining or an existing one?
- A new programme
- A new lining for an existing machine
- An existing lining under performance review
- An old lining, material or supplier no longer available
- A supply-continuity issue
- A prototype moving towards production
What conditions will the lining run in?
- Load
- Speed
- Temperature
- Whether it runs dry or near oil or water
- Available installation space
- Known wear or heat concerns
A drum brake: the lining, in green, on each brake shoe inside the drum.
A band brake: the lining, in green, on the inside of the brake band wrapped round the drum. Every question reads into the same lining.
What technical information is available?
- A drawing or partial drawing
- An OEM part number
- The old lining's reference
- Drum or band size
- Specifications
- Required performance
- Test or inspection records
A complete technical pack is not required before the first conversation.
What must the finished lining demonstrate?
- Required friction behaviour
- Wear expectations
- Heat requirements
- Dimensional requirements
- Bonding or backing-component requirements
- Inspection requirements
- Acceptance evidence
- Validation and approval responsibilities
How will the lining be supplied?
- The grade you already have in mind
- Quantity and prototype quantities
- Expected annual volumes
- Repeat-production schedules
- Packaging, labelling and identification
- Delivery requirements
Expected annual volumes are discussed after the application and technical fit have been established.
Brake lining materials FTL makes: woven, moulded and flexible roll
The material for a brake lining is chosen by its duty, and FTL makes friction linings in three constructions for drum and band brakes.
Woven brake lining
FTL's woven friction material for brake linings includes FTL129 and FTL137, closely woven linings from glass and synthetic fibre yarn with fine copper wire, and they perform well in wet and damp conditions, which suits marine work. FTL095 is a non-asbestos woven lining of glass cloth with heat-resisting organic fibre and fine brass wire, and FTL133 is a woven non-asbestos lining on solid woven cotton fabric. FTL095 is DNV-GL approved.
Moulded (molded) rigid brake lining
FTL126 is a rigid moulded lining with short steel filaments for heat dissipation and strength. FTL131 is rigid moulded on mineral fibres with a synthetic rubber binder system, with excellent resistance to fade and wear, and quiet in operation. FTL142 and FTL135.2 are rigid moulded, resin-based linings with non-asbestos mineral fibres, and FTL135.2 is DNV-GL approved.
Flexible roll brake lining
FTL123 is a flexible, semi-cured moulded lining, flexible enough as supplied to fit curved metal parts, after which the heat of service increases its strength and stiffness. Supplied fully cured, it is FTL124. FTL132 is a semi-flexible roll for dry running only. Together with the woven roll grades, they are FTL's flexible brake lining material on the roll, for brake bands.
FTL makes both woven grades (FTL095, FTL129, FTL133, FTL137) and moulded grades (FTL126, FTL131, FTL135.2, FTL142), so woven or moulded can be chosen to suit the brake. FTL also makes sintered friction material for drum and band brakes: FTL004, FTL509 and FTL510, in the table below. Grades for industrial disc brakes (FTL135, FTL135.1 and FTL141.1) are on the industrial brake pads page.
| Grade | Type | Form | Supplied as | Non-asbestos | Used for | Friction coefficient, dynamic / static |
|---|---|---|---|---|---|---|
| FTL123 | Organic | Flexible | Roll | Yes | Industrial drum and band brakes; crane and excavator brake and clutch linings | 0.35 / 0.32 |
| FTL126 | Organic | Rigid | Sheet, discs, shapes | Yes | Industrial drum and band brakes; crane and excavator brake and clutch linings | 0.42 / 0.38 |
| FTL129 | Woven | Flexible | Sheet, roll, discs, shapes | Yes | Industrial drum and band brakes; marine towing winches | 0.42 / 0.45 |
| FTL131 | Organic | Rigid | Sheet, discs, shapes | Yes | Industrial drum and band brakes; crane and excavator brake and clutch linings | 0.38 / 0.40 |
| FTL132 | Organic | Flexible | Roll | Yes | Industrial drum and band brakes; crane and excavator brake and clutch linings | 0.38 / 0.35 |
| FTL135.2 | Organic | Rigid | Ask FTL | Yes; DNV-GL approved | Industrial drum and band brakes; crane and excavator brake and clutch linings | 0.40 / 0.45 |
| FTL137 | Woven | Ask FTL | Sheet, roll | Yes | Industrial drum and band brakes; marine mooring and towing winches | 0.40 / 0.52 |
| FTL142 | Organic | Rigid | Sheet, shapes | Yes | Industrial drum and band brakes; crane and excavator brake and clutch linings | 0.40 / 0.35 |
| FTL510 | Sintered | Rigid | Ask FTL | Yes, free of asbestos, lead and zinc | Industrial drum and band brake linings, industrial disc brakes, industrial plate type clutches and cranes | 0.42 / 0.50 |
| FTL004 | Sintered | Rigid | Ask FTL | Yes | Drum and band brakes for aircraft; heavy earth machinery; miscellaneous industrial devices | 0.48 / 0.50 |
| FTL509 | Sintered | Rigid | Ask FTL | Yes | Drum and band brakes for aircraft; heavy earth machinery; miscellaneous industrial devices | 0.45 / 0.55 |
| FTL095 | Woven | Flexible | Roll | Yes; DNV-GL approved | Marine equipment such as anchor windlass and hoist; lifts and elevators; cranes, hoists and heavy duty industrial equipment; industrial clutches | 0.50 / 0.60 |
| FTL133 | Woven | Flexible | Sheet, roll, shapes | Yes | Centrifuges, electromagnetic brakes, winches, cone clutches and hoists; dry running, not recommended for oil immersed applications | 0.47 / 0.50 |
NOTE Published summary values from FTL's data sheet library. Full technical data is on each sheet. FTL confirms technical fit after reviewing the specific application.
FTL144, FTL152, FTL161 and FTL219 are four more flexible grades, with documents on request. The full list is in the data sheets page.
Inputs that shape the material decision
- Required braking or holding behaviour
- Coefficient stability
- Wear rate
- Heat and thermal performance
- Load, speed, temperature, contamination
- Lining and backing-component geometry
- Bonding and finishing requirements
- Inspection and validation evidence
The choice should follow an application review rather than a material-family comparison in isolation.
Published data is a starting point. Final material selection depends on the complete application and agreed validation route.
Non-asbestos brake linings
FTL makes non-asbestos brake lining material in Caernarfon, UK, for industrial drum and band brakes.
Every FTL grade is non-asbestos, so all thirteen here are: moulded FTL126, FTL131, FTL135.2 and FTL142, flexible roll FTL123 and FTL132, woven FTL095, FTL129, FTL133 and FTL137, and sintered FTL004, FTL509 and FTL510. FTL510 is also free of lead and zinc.
Replacing an old asbestos brake lining on industrial equipment starts from what is known about the brake: the drawing or OEM reference, the drum or band dimensions, the duty, and the old lining's reference if there is one. FTL then proposes a non-asbestos brake lining grade and confirms technical fit after reviewing the application.
If an old lining may contain asbestos, follow the Health and Safety Executive's guidance before it is removed or handled: hse.gov.uk/asbestos.
Brake bands and band brake lining
FTL's flexible roll is made for brake bands: woven and flexible organic lining, supplied on the roll.
A brake band is lined along its inside, so the lining has to bend to the band's curve. The roll grades are FTL095, FTL123, FTL129, FTL132, FTL133 and FTL137, supplied as brake band material and as cut and shaped linings.
To help with fitting to brake shoes and bands, FTL129 and FTL137 can be warmed in a bonding oven to soften them and make them more pliable. FTL123 and FTL132 are flexible as supplied and stiffen with the heat of service.
On winches, FTL129 is made for marine towing winches and FTL137 for marine mooring and towing winches. FTL makes band brake lining as friction material and bonds it to backing components.
A controlled path from brake lining brief to repeat manufacture
The exact sequence varies by project, but each stage should produce enough evidence to support the next engineering decision.
Establish technical fit
- Application + required function
- New, existing or obsolete
- Programme stage
- Performance or supply concern
- Information available
Define application requirements
- Drum, band or disc brake
- Load, speed, temperature, contamination
- Lining, backing-component and brake information
- Required braking behaviour
- Existing performance evidence
- Inspection and documentation needs
Establish material and component route
- Established grade or development work
- Lining geometry development
- Backing component
- Machining, bonding, finishing, inspection stages
- What remains unknown
Agree prototype and test plan
- Material or component variants
- Prototype quantities
- Manufacturing stages
- Features and dimensions to inspect
- Tests + acceptance evidence
- FTL and customer responsibilities
Manufacture the prototype linings
- Friction-material production
- Friction and metallic-component machining
- Surface preparation
- Bonding, finishing, assembly
- Inspection
Test, inspect and refine
- Agreed material, dynamic, dimensional or bond testing
- Evidence reviewed against requirements
- Revise material, geometry or route where needed
Support validation and approval
- Engineering, manufacturing, test, inspection and traceability evidence within scope
- Final machine, system, customer or regulatory approval responsibilities agreed per project
Transfer into controlled repeat supply
- Repeat-production controls
- Inspection and traceability
- Inventory holding, scheduled call-off
- Customer-specific packaging and identification
- Export documentation and delivery
Testing and inspection tied to defined engineering questions
Testing should be selected around what the project needs to establish, not used as a generic claim that a lining will perform in every industrial brake system.
Depending on the agreed scope, a project can draw on coefficient-stability and wear-rate assessment, thermal-performance and bond-integrity testing, CMM dimensional inspection and production evidence such as in-process checks, final inspection and batch traceability. The available methods, conditions and acceptance evidence are described in full on the testing and inspection capability page.
The exact samples, test conditions, methods, acceptance criteria and customer responsibilities must be agreed before testing begins.
Keep the friction material connected to the finished lined component
A fragmented route can divide responsibility between the material formulator, friction-component machinist, backing-component supplier, bonder, finisher, test provider and inspector.
FTL can connect the relevant stages through one engineering and manufacturing chain, helping keep the material, component and production decisions aligned and the friction material connected to the finished lining.
The full connected route, from application review through friction-material selection, machining, bonding, finishing, testing and traceability to scheduled supply, is set out on the Single-Source Friction Manufacturing page.
Actual lead-time, procurement or cost benefits depend on the current supply arrangement and agreed project scope.
Brake linings for cranes, hoists, winches and heavy machinery
FTL makes replacement brake lining material in the UK for crane, hoist and winch brakes: eight FTL grades are made for crane brakes.
FTL makes the lining for crane and hoist brakes, not the brakes themselves. Do not select a material from the word crane alone. FTL reviews the load, speed, temperature, operating environment, available geometry and the test and validation evidence required, and each enquiry still needs a review of the individual brake and its operating environment.
Crane and excavator brakes
FTL123, FTL126, FTL131, FTL132, FTL135.2 and FTL142 are made for crane and excavator brake and clutch linings, and FTL510 and FTL095 cover cranes too. FTL095 is the woven grade for cranes, hoists and heavy duty industrial equipment.
Hoists and lifts
FTL095 is made for hoists and lifts, and for marine equipment such as anchor windlass and hoist. FTL133 is used on hoists, winches, electromagnetic brakes, centrifuges and cone clutches, for dry running.
Winches
FTL129 is made for marine towing winches and FTL137 for marine mooring and towing winches. FTL133 is also used on winches.
Heavy machinery
The sintered grades FTL004 and FTL509 are made for heavy earth machinery and other industrial devices, running dry. FTL510 is the sintered grade that is also free of lead and zinc, for drum and band brake linings and cranes.
These are application contexts rather than stock product categories. FTL should confirm technical fit for every enquiry.
Questions buyers need answered before approving a brake lining
Can FTL match or improve the current lining performance?
FTL can review the current lining, available material information, operating conditions and required behaviour before proposing an established, optimised or newly developed route. Whether performance can be matched or improved depends on available application evidence, defined operating conditions, lined-component construction, agreed test conditions, acceptance criteria and validation responsibilities. No outcome is promised before the review and required development work are complete.
Is the proposed lining already proven in service?
Where relevant application history or established-material evidence exists, FTL can identify it during the technical discussion. A new, modified or redeveloped application may still require project-specific testing and customer validation.
How does FTL support consistent quality and repeatability?
The available route connects friction-material formulation, lining and component engineering, machining, surface preparation, bonding, finishing, testing, inspection, production documentation and batch and lot traceability. The exact production controls and acceptance requirements are agreed for the individual project.
Can FTL manufacture the complete lined component?
Yes, where the project fits FTL's confirmed scope. FTL can support the friction material and complete-component route through engineering, machining, bonding, finishing, testing, inspection and repeat supply.
Can FTL supply the linings sooner?
There is no standard lead time for every brake lining project. Timing depends on information available, material-development work, lining and backing-component complexity, prototype iterations, testing and inspection, customer validation, production quantities and supply requirements. FTL confirms the proposed stages and timing after the initial technical review.
Can the price be improved?
Pricing depends on the agreed engineering, material, component, testing, documentation, volume and supply scope. The first conversation establishes technical fit. Commercial options can then be reviewed against the actual requirement rather than a standard online price.
A trusted, accountable supplier since 2003
High-performance friction and braking solutions, backed by decades of in-house expertise and made in North Wales.
Company-level standards support organisational and manufacturing assurance. Material suitability, component acceptance and programme requirements must still be agreed for the individual industrial application.
Friction engineering backed by controlled manufacture
SDTS approached FTL after an original aircraft brake pad became unavailable. FTL redesigned the pad, established a replacement material route and manufactured a component aligned with the stated aeronautical technical requirements, supporting SDTS's modification-certification process. This is an aircraft brake-pad redevelopment example that demonstrates relevant manufacturing capability rather than industrial-equipment proof.
“To continue flying our aircraft, we approached FTL to find replacement solutions for our brake pad problem, as the original part was no longer available on the market. The quality of our discussions, from both a technical and commercial standpoint, FTL's responsiveness in redesigning the pad with a material that meets aeronautical technical requirements, and their ability to adapt to our aeronautical environment allowed us to certify a modification applicable to our aircraft. The quality of the manufactured product is remarkable. Thanks to FTL, we can continue to fly, land, and brake safely.”
Olivier Moulin ![]()
Confirmed organisational proof
- ISO 9001:2015, BSI certificate FS 504348, for the manufacture, warehousing and distribution of friction materials for industrial brakes and clutches application
- More than 20 years of experience
- Friction and metallic-component machining
- Controlled bonding and finishing
- Material, dynamic and shear testing
- CMM dimensional inspection
- Batch and lot traceability
Customer proof
Is FTL the right route for your industrial brake lining requirement?
FTL is a strong fit when:
- Your team has an application brief rather than a stock-parts request
- A new lining requires a custom material or component route
- An existing lining has braking, wear or heat concerns
- The original material, drawing, supplier or complete lining is obsolete
- The requirement includes a bonded lining or backing component
- Prototype work may need to progress into repeat manufacture
- Testing, inspection and traceability matter
- You want fewer suppliers across material, machining, bonding and finishing
- The finished linings require scheduled supply
A different route may be more appropriate when:
- You need an off-the-shelf lining immediately
- You are purchasing solely by part number
- You need a stock catalogue
- Price is the only selection criterion
- No technical or manufacturing review is required
- You need used shoes or bands relined or refurbished
- You need riveted linings
Questions engineers ask about brake linings
What does a brake lining do?
What are the types of brake lining?
What is the best material for brake linings?
What is a brake band?
How does a band brake work?
What holds drum brake friction material?
Was asbestos used in brake lining?
How thick should a brake lining be?
Who relines brake bands?
What is the difference between a shoe brake and a band brake?
Ask an FTL engineer about industrial brake linings
A part number, a machine, or the problem in your own words.
Bring us the brake details, the lining reference or the drawing.
Tell FTL what the brake lining needs to do, what has prompted the enquiry and what information your team currently has.
A short initial brief is enough.
The relevant technical, engineering and commercial team members can then review the operating conditions, material route, complete-component requirements and most appropriate next step.
Optional drawing or specification upload available.